Infrastructures

Real Estate
	Sophisticated Administration Building	250 Sq. Mts
	Systematic Covered Work Building	3000 Sq. Mts
	Open Area for Future Expansion	6000 Sq. Mts

Welding Positioner
	15 tons electromechanical welding positioner	1 no
	10 tons electromechanical welding positioner	2 nos
	5 tons electromechanical welding positioner	1 no
	2 tons electromechanical welding positioner	2 nos
	1 ton electromechanical welding positioner	5 nos
	0.5 ton electromechanical welding positioner	4 nos

Machining
	VTL - 4.5 mts Swing / 4.0 mts Height	1 No
	VTL - 1.8 mts Swing / 1.4 mts Height	1 No
	VTL - 1.5 mts Swing / 0.8 mts I Ieight	1 No
	VTL - 1.2 mts Swing / 1.2 mts Height	1 No
	VTL - 1.0 mts Swing / 0.5 mts Height	1 No
	VTL - 0.8 mts Swing / 0.7 mts Height	1 No
	HBM - Spindle 150 mm / 4.0x3.0x2.5 mts	1 No
	HBM - Spindle 100 mm / 1.7x1.7x1.5 mts	1 No
	I-IBM - Spindle 80 mm / 0.9x0.8x1.0 mts	1 No
	Planomiller - 3.5x1.7x2.0 mts	1 No
	Drilling - RM 125 x 4.0 mts Height	1 No
	Drilling - RM 100 x 4.0 mts Height	1 No
	Drilling - RIVI 65 x 2.0 mts Height	1 No
	Drilling - RM 65 x 2.0 nits Height	1 No
	Milling, 9C -30 & Heavy Duty Centre Lathes

WELDING

1 No - Micro Plasma

Inverter based; In built Pilot Arc; Full fledged pulsing & Sloping facility capable to do overlay on Thin sheet.

1 No - Micro TIG

Inverter based; In built High Frequency; Full fledged pulsing & Sloping facility capable to do overlay on Thin sheet.

1 No - Spray & Fuse

Thermal Spraying System for high hardness smooth, Nonporous low RMS finish (1000 deg C to 1200 deg C); By Torch.

2 Nos - PTAW

Programmable Logic Control (PLC) based to control Power Source, Positioner, Oscillator & Powder feeder, Water Recirculation Cum Chiller Housed in a separate Control Panel. Enables fully automatic operation with single button start.

2 Nos - SAW

Semi Automatic using Generator for high deposition rates, deep penetration, operator comfort characteristics make submerged arc welding a preferred choice for fabrication and Hard Facing.

6 Nos - FCAW /GMAW

Fully Automatic / Semi Automatic pre programmed; inverter based power source & Synergic wide feeders suitable for Fabrication; deposition Overlay/Cladding and Hard Surfacing.

4 Nos - GTAW

Semi Automatic pre programmed; inverter based power source & Remote controlled Torch suitable for Fabrication; deposition Overlay/Cladding and Hard Surfacing.

5 Nos - SMAW

Ignition pulse, automatic arc and an anti-freeze function inverter based power source suitable for Fabrication; deposition Overlay/Cladding and Hard Surfacing.

2 Nos - 55 KW Furnace

Digital controlled; Programmable and recordable Panel suitable for Preheating & P'WHT.

4 Nos - Electrode Drying & Holding Oven

Digital controlled & Programmable suitable for all Weather Condition.